Home › Products › Luxury Vinyl Plank › Trecento XL › White Ocean
Home › Products › Luxury Vinyl Plank › Trecento XL › White Ocean
5 mm thickness · 12 mil wear layer · 18x36 in. tiles
White Ocean XL™ evokes coastal tranquility with soft white and light gray striations reminiscent of natural travertine. The 18x36" format enhances the breezy, open look in kitchens, bathrooms, or living areas.
Homes & Rentals
Mudrooms, Kitchens, & Bath Rooms
Offices & Retail spaces
Flips & Remodels
✅ Coastal Serenity: Light striations deliver a modern, airy travertine look.
✅ Expansive Tiles: Large 18x36" format creates continuity in open spaces.
✅ Resilient Design: CrystaLux™ wear layer protects against daily wear.
✅ Natural Texture: PietraTech™ finish gives authentic stone character.
✅ Same-Day Installation: No acclimation required for quick, easy setup.
Can be installed over properly prepared wood, tile, or concrete subfloors. No acclimation required. For best results, pair with our matching trim and transitions.
Is White Ocean waterproof?
Yes. White Ocean is 100% waterproof luxury vinyl tile suitable for moisture‑prone areas like kitchens, bathrooms, and basements.
Can I install this over tile or concrete? Do I need an underlayment?
Yes—our click-lock floating floor installs over most properly prepared subfloors, including well-bonded tile, concrete slabs, hardwood, and linoleum. Make sure the surface is clean, dry, and flat within manufacturer tolerances.
Concrete: Because concrete can transmit moisture, lay a continuous 6-mil polyethylene (poly) vapor barrier with taped seams before installing to help prevent moisture issues and mold.
Wood subfloors (OSB/plywood): A separate vapor barrier isn’t needed—just confirm the subfloor is dry, sound, and level.
Underlayment: The planks include a pre-attached IXPE foam pad, so no additional cushion is required.
Avoid installing over soft or loose flooring (like carpet), and correct any high/low spots before you begin for best results.
What are the specs?
Trecento XL Collection · 5 mm thickness · 12 mil wear layer · 18x36 in. tiles · Pre-attached IXPE foam underlayment
1.5"x0.25"x94"
End Cap
2.75" x 0.75" X 94"
Flush Stair Nose
2.23"x1.03"x94"
Overlapping Stair Nose
1.77"x0.28"x94"
T-Moulding
2.23" x 1.03" X 94"
Surface Reducer
0.64"x0.75"x94"
Quarter Round
12"x1.25"x47.25"
Stair Tread Eased Edge